Description
Feature
CNC machined The texture of cutting with duralumin is a high quality finish. Comes with occlusion cap. Protects screwed parts.
Can be attached to a mini tripod The bottom of the tank has a "1/4 inch screw hole'' that allows you to attach a "mini tripod'' for use with cameras, etc. Stable installation is possible even on uneven surfaces. (*Mini tripod is not included.)
Easy filling Can be filled from a variety of fuel cans. The top of the filling tank is made of brass. Fill with gas through this valve. When filling lighter gas or other CB cans, insert the nozzle at the tip straight into the valve of the filling tank and fill by pushing from above. *When installing a fillable tank or container (cylinder), install it vertically.
Can also be filled from Lindal valve cans using an adapter Multi-adapter Z15 (sold separately) is required.
Usage scene
1
Gas torch
Gas stove
Gas heater
Gallery
Specs
Note:
Turn the container (tank) upside down so that the gas filling valve faces upward, and insert the stem of the CB can straight into it to fill it with gas. *Insert the nozzle of the cylinder vertically into the gas inlet and press firmly. At this time, make sure to accurately align the cylinder nozzle with the tank's gas inlet. *Filling will be completed in approximately 8 to 35 seconds (please avoid filling for more than 35 seconds). *Work outdoors, away from fire, and stand upwind. Don't forget to check that there are no people around. *As you fill the gas, liquid gas will gush out from the gas filling bubble, so use this as a guide to finish filling. (Gas leakage during filling is normal, as is the case with other products, but if you are concerned, we recommend purchasing the dedicated adapter "Multi Adapter Z11/Z15" separately.) *Please note that gas containers are, in principle, not allowed to be carried on board aircraft, so carrying them on board, checking them in, or transporting them by airmail will be considered unacceptable.
Cautions
Prohibition of overfilling with gas When filling with gas, do not overfill (repeatedly repeating the filling process even if gas blows out from the filling port). Overfilling is not safe as the gas may come out in liquid form and cause abnormal combustion. It may also cause clogging and other malfunctions. If the flame size is unstable (pulsating), it may be overfilled. In that case, turn the appliance stopper knob to OFF, make sure the flame is extinguished, and remove the fillable tank. Push in the pressure reducing valve of Multi Adapter Z15 to release the overfilled gas. The size of the flame is greatly affected by the remaining amount of gas, gas composition, and internal pressure of the container (cylinder). The flame tends to be smaller when there is less gas or when regular gas (butane only gas) is used. When the temperature is low, we recommend using power gas (gas containing propane). When storing or carrying the product, do not hold the squirt part. There is a risk that the squirt may come off. Be sure to hold the main unit when carrying it. Regarding this product, unlike commercially available gas cans, the firepower is somewhat unstable due to a lack of steam pressure inside the tank. When you use it for the first time, the flame will not be stable because there will be some air left in it, but as you use it, the air will come out and it will become more stable.We appreciate your understanding and understanding.